IC-70-2

Customizable and Durable with Easy Maintenance

Maximum payload of 14,300 lbs.
2 Speed automatic hydrostatic transmission
Ground pressure from 2.4 empty to 4.1 PSI loaded
224 HP Mitsubishi diesel engine
Bed capacity of 7.5 cu. yds. (heaped)
Available with fully enclosed heated & AC cabin
Wide range of attachments
Wide range of applications

The IHI crawler carriers can be customized to fit any job application. Modifications include digger derricks, insulated and non insulated man lifts, front and rear winches, and liquid tanks/firefighting apparatus. Heavy-duty lower track frame with sealed components are standard equipment. Over-sized bearings have been used in the lower rollers and an abrasion resistant material has been applied to all surfaces of the upper rollers. Cross member technology strengthens dump bed stability and all tracks have been enhanced. The IHI crawler carriers have decreased the down time associated with maintenance. The lower track frame consists completely of sealed components. All access doors and engine cover are large and easily reached.

Request Information

Request Literature

< back to Crawler Carriers

Features

Attachments

Specifications

The IHI Crawler Carriers can be used for more than just hauling material. The heavy duty frame allows a contractor to mount various attachments. Custom applications are also available.

Digger Derricks

Digger Derricks can be installed on all crawlers.

Seismic Weight Drop

All crawler carriers can be fitted with a seismic weight drop for exploration of gas and oil.

Personnel Carrier/ Utiltiy Rack

This Personnel carrier and utility rack were installed and the bed of this IC-70 cut down to accommodate a contractors specific needs

Drill Rig

This IC45-2 has been equiped with a drill rig. The bed and cylinders have been removed.

Liquid Containers

Liquid containers have been attached to the bed of both the IC-45 and IC-30 for fire fighting applications and also vegetation control.

Winches

Winches can be added to an size crawler carriers and can be placed in the front or rear of the carrier.

Basic Specifications
Payload	14,300 lbs.
Operating Weight	20,680 lbs.

Engine
Make	Mitsubishi
Model	6D16 TLI
Horsepower	224 @ 2,700
Fuel Capacity	52 gals

Systems
Travel Drive System	HST
Transmission System	2 Speed Automatic+Manual Selection
Brake System	HST Brake+Parking Brake

Dimensions
Total Length	17'7"
Total Width	8'5"
Total Height	8'8"

Crawler
Crawler Span	8'2"
Track Width	27.5"
Ground Clearance	1'9"

Travel Speed
Low (mph)	4.5
High (mph)	7.5

Stability
Gradeability (deg)	30
Side Stability

Ground Pressure
Empty	2.4 PSI
Loaded	4.1 PSI

Vessel Capacity
Heaped	7.5 cu. yd.
Stuck	5.0 cu. yd.

Vessel Dimensions
Length	10'2"
Width	7'3"
Height	1'3"

Vessel
Height From Ground	4'2"
Max Dumping Angle	65 (deg)
Dump Clearance	2'9"