|
 |
| NX Series: 9NX-2 |
- 2,060 Zero tail swing mini excavator
- 10.0 H.P. water cooled diesel engine
- 2-speed travel
- Auxiliary hydraulics to front of unit
- Standard backfill blade
- Expandable tracks 27.5 to 37.5 inches
- 5'2 Digging Depth
|
|
|
|
|
| Power and Stability |
 |
Standard on the 9NX-2, the side lifting capability is boosted by equipped expandable tracks. |
|
| Spacious Control Room for the Operator |
 |
| With the 4-post canopy, the operator can have a clear and unobstructed view. |
|
| Smoother Operation Exceeding World Standards |
 |
| Hydraulic pilot joystick controls with armrest are equipped to offer a high degree of operational responsiveness. |
|
| "World Standard" Maintenance |
 |
| A fully opening engine cover allows easy access for replacement of filters as well as regular maintenance of the engine. |
|
- Auger
- Hammer
- Special Buckets
- Hand Held Tools
- Rip-N-Pin
 |
| A |
8'10" |
| B |
2'11" |
| C |
3'11" |
| D |
2'3.5" |
| E |
1'4" |
| F |
6'10" |
| G |
9.5" |
| H |
7" |
|
| I |
27.5-37.5" |
| J |
1'6" |
| K |
1'7" |
| L |
3" |
| M |
1'3" |
| N |
11' |
| O |
7" |
|
|
|
 |
| A |
Max Digging Radius |
9;9" |
| B |
Max Digging Depth |
5'2" |
| C |
Max Digging Height |
9'0" |
| D |
Max Dumping Height |
6'6" |
| E |
Max Vertical Digging Depth |
3'10" |
| F |
Min Front Turning Radius |
4'0" |
| |
At Right Boom Swing |
3'1" |
| |
Digging Force |
2,360 lbs |
|
|
| Canopy |
4 Post |
| Bucket Capacity |
.80 cu. Ft. |
| Operating Weight |
2,060 lbs. |
| Transports Weight |
1,885 lbs. |
|
| Pumps |
2 |
| Type-Piston/Gear |
2 Gear |
| Total Flow |
5.9 gpm |
| Operating Pressure |
2,350 psi |
| Auxilliary Flow |
5.9 gpm |
|
| Model |
Yanmar 2TNV70 |
| Horsepower |
10 @2,400 rpm |
| Fuel Tank Capacity |
2.2 gals |
|
| Length |
8'10" |
| Width |
2'3.5" |
| Height |
7'5" |
|
| Travel Speed L/H |
1.1/2.2 mph |
| Ground Pressure |
3.8 psi |
| Swing Speed |
8.7 rpm |
| Swing Angle |
L50°/R90° |
|
|
|
|
|